The Bond Laser 3015 exchange station, 3000-watt Chuangxin laser, Bond system, Bond cutting head, TEWEI water system, Schneider servo motor, complete set with air compressor stabilizer, will be delivered in 2022.

American Hardinge GX1000plus vertical machining center, 24T robotic arm tool magazine, 10,000 RPM ultra-large diameter BBT40 spindle with oil cooling, FANUC MFplus system, Y-axis heavy-duty three-rail system, high-spec α motor drive, machining accuracy of 0.01.

2020 BOSS HF series high-end machine 8025 exchange laser cutting machine, IPG 12,000-watt laser operating at full power for 6,000 hours, PreciCut cutting head, 901 system, Rexroth drive motor, voltage stabilizer, complete air compressor set.

61100 × 1500 CNC lathe, heavy overall floor-standing bed frame, guide rail width of 600, equipped with an Ø630 four-jaw chuck, four-speed internal frequency conversion, Guangshu 980TDC system.

1313 × 3 meters CNC pipe lathe! Sanzheng QK1313/3 meters CNC pipe lathe, Kaindi K1000TCi bus absolute value system, with front ø400 three-jaw and rear ø400 four-jaw, main shaft through-hole diameter ø130, rotary diameter ø630, processing length 3000, three-speed internal frequency conversion, guide rail width 500, machine condition very attractive. The guide rails are like mirrors.

Glema 2350T drilling and milling center, equipped with a 21T servo tool magazine, a 20,000 RPM BT30 spindle, Mitsubishi M80 system, a monolithic cast super-large bed base, three-axis travel range X2300/Y500/Z450, Y-axis with dual screw motor drive on 4 guide rails, installed in essentially unused condition.

State craftsman HS-2016 Dragon Machining Center, FANUC OI-MF Plus system, Taiwan Jianchun BT50 main spindle with 6,000 RPM, Taiwan Fangguan 24-blade arm type tool magazine, three-axis linear rail system, Z-axis high rigidity 4-guide rails, worktable 2000*1400mm, gantry width 1600mm, gantry height 1100mm, three-axis travel range X: 2000, Y: 1660, Z: 800, dual screw and chain scraper, main spindle with oil cooling, Z-axis nitrogen balance.

3 units of 95% new Jihete 52-type high-configuration inclined rail turret machines, with two line rails. 2 units with a processing length of 350 without a tailstock and a 10-position servo turret, and 1 unit with a processing length of 500 with a tailstock and a 12-position servo turret. New Daiwei 6TA bus absolute value system, Taiwan Luoyi high-speed precision main shaft unit, Qian Dao 8-inch hollow chuck with a through hole ø52. 2 units are equipped with chain-type chip removal devices. Processing accuracy: 0.01.

Baoji One Machine ESK40/1000, equipped with the Guangshu 980TC3 bus absolute value system, 5.5/7.5 kW servo main motor, nearly new condition, guide rail patterns still present.

Unbeatable value! Just arrived are 2 identical units of the TD500 drilling and milling center from Dalian. It features a 16-tray servo turret, 20,000 RPM with oil cooling, a Siemens 828D system, and is ready for production upon power-up.

99% new, robust VF1160 CNC machine center, FANUC MFplus system, 10,000 RPM BT40 spindle with oil cooling, 24-tool robotic arm magazine, manufactured in 2025, virtually unused, cutting time over 300 hours.

Heavy-duty 6163/1.5 m CNC lathe with hydraulic chuck! Remaining 1 unit: 95% new Zhejiang Yusheng 6163C/1500 CNC lathe, equipped with a 12-inch hollow hydraulic chuck, A2-11 large spindle, track width 550 heavy bed frame (Yunnan Jingji 6180 optical machine), 11 kW main motor + three-speed internal frequency conversion, with Kaidi K1000TFi bus absolute value system, manufactured in 2024. Very little used.

CK64160 CNC end-face lathe, high-strength Mianhan heavy-duty cast frame bed, 1270mm wide heavy guide rails, rotary diameter Φ1800, chuck diameter Φ1600, processing length 1000, equipped with Guangshu 980TDi bus absolute value system, 18.5kW main motor + internal frequency conversion for high and low speed settings, a marvel for disc-type processing, idle equipment from a large factory.