Gantry milling machine.

  • Home
    • > Heavy equipment
Home > Heavy equipment(106)
Heavy equipment

Gantry milling machine.

Hitachi portal milling machine from Japan. Workbench: 1.25 x 5 m The archway is 1.4 meters wide. Two milling heads, one boring-milling head. Bring a vacuum cleaner. The weight is approximately 35 tons. Physical dimensions: Length: 12 meters. Width: 4.6 meters. Height: 3.7 meters.
02.png

 +82 1087540208
03.png

 13244734473 
01.png

 01087540208

Prev Next List
A 2-meter x 14-meter CNC horizontal lathe.
22
CNC head-end boring and milling processing center.
South Korea
20
1.25 x 21 meters (18 + 3-meter length) Russian heavy passenger van.
21
Wuhan Gewei 1.6 meters. CNC gear hobbing machine.
21
A 1.6-meter German Laurentz involute broaching machine!
22
Sykes 5E horizontal broaching machine, 1.6 meters long, module size 16, tooth width 457.
22
W250HC Skoda floor-type boring machine! 4.15 meters/15 meters! Return table: 4x4 meters.
19
250 Skoda floor-type boring and milling machine! 6.15/18 meters! Return table: 4x4 meters.
22
Czech Tos 6913 floor-type boring and milling machine! Travel range of 2.5 × 4 meters.
21
Italian 150 floor-type boring machine, 2.5 meters x 6 meters, return table 2.5 meters x 2 meters.
23
German Heckert Heavy-duty Portal Rail Grinding Machine.
German Heckert Heavy Duty Portal Guide Rail Grinder, SZ12-16-05, worktable 1.25 m/5.5 m, portal width 1.6 m, height 1.6 m, featuring a heavy-duty flat dual sanding head, universal head, peripheral head, electrical components upgraded, user manual included.
20
Japan OKUMA-MCR-A5C
Japanese OKUMA-MCR-A5C. The worktable is 2.5×5 meters, the door width is 3.3 meters, the processing height is 1.95 meters, the tool magazine holds 72 tools, and it features an extended milling head and a right-angle head. The equipment is from 2011.
22
Japan’s Okuma MCV-A2.
Japanese Okuma OKUMA-MCV-A2. The worktable is 1.5×3 meters, the door width is 1.9 meters, the processing height is 1.65 meters, and there are 50 tool holders available.
19
Japanese KURAKI-KBT-13 horizontal boring and milling machine.
Japanese KURAKI-KBT-13 horizontal boring and milling machine, system FANUC 16i-MB, equipment from 2005, spindle speed 4000 rpm, tool magazine with 40 tools, worktable size 1.8 × 2.2 m, travel range 2 × 3 m.
21
Japanese TOSHIBA-BF-130 floor-mounted boring and milling center.
Japanese TOSHIBA-BF-130 floor-mounted boring and milling center, system TOSNUC-888, worktable 3 × 3.4 meters, main spindle 130, travel range 3.5 × 4.5 meters, tool magazine 60, with few tools in place.
21
SHIYIDE (SHENZHEN) INTERNATIONAL TRADE CO.,LTD All rights reserved.
3

收藏
(0)

0/0